Installation
75
EN
5.4 Power limitation
The appliance is factory set to use the
maximum available power: 7.4 kW.
5.5 Section cut from the countertop
Create an opening with the dimensions
shown in the figure in the countertop of the
piece of furniture.
Hob seal
To prevent leakage of liquid between the
frame of the hob and the countertop, place
the adhesive seal provided along the entire
outer edge of the hob before assembly.
Overall dimensions (mm)
Semi-flush mounting dimensions (mm)
The maximum power of the
appliance can be regulated via
the user menu.
The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (
>90°C
).
Do not use silicone to secure the
hob. This would make it impossible
to remove the hob, if necessary,
without damaging it.
L
X
Y
800
750 ÷ 780
480 ÷ 490
900
839 ÷ 844
478 ÷ 482
A
B
C
D
E
min.
50
min.
460
min.
750
20÷60
min.
50
