background image

Use

64

This function has an automatic and a 
manual mode:
•  Automatic mode (default), adjusts the 

hood extractor fan speed according to 
the total power of the appliance (see 
“User menu” - option 

U8

)

•  Manual mode allows you to adjust the 

extractor fan speed by pressing the 

 

button.

After switching on the hob, to activate 
manual mode:

1. Press the 

 button, which will light up 

at full brightness.

2. Each subsequent press of the button 

increases the hood fan speed according 
to a cyclic sequence with 5 levels of 
adjustment, from 0 (off) to 4 (maximum 
speed).

To go back to manual mode, the appliance 
has to be switched off and on again.

3.6 Settings menu

The settings menu allows you to modify 
some of the operating characteristics of the 
appliance and allows you to
With the appliance switched on, press the 

 button to access the settings menu. 

The scroll bar and all the icons of the 
settings that can be modified appear:

Individual settings can be selected using the 
segment of the scroll bar that is most directly 
below it.

Press the 

 button again to exit from the 

menu.

Pause function

 

To activate the Pause function:
1. Switch on at least one cooking zone.
2. Access the settings menu.

3. Press the segment of the scroll bar below 

the 

 icon. The 

 symbol appears 

on the cooking zone displays.

Refer to the hood manual for more 
detailed information.

The 

 and 

 icons refer to 

functions that can only be modified 
via the user menu.

This function pauses the operation 
of all the cooking zones and the 
timer.

Summary of Contents for SI1M4744D





































Reviews: