Smeg SE435S Instructions Manual Download Page 1

Dear Customer,
Thank you for having purchased one of our products.
We  are  certain  that  this  new,  modern,  functional  and  practical  appliance,  built  with  the  very
highest quality materials, will meet your requirements in the best possible way. This hob is easy
to use. It is, however, important to thoroughly read the instructions in this handbook in order to
obtain the best results. 

The manufacturer shall not be held responsible for any damages to persons or property
caused by incorrect installation or use of the appliance.

The  Manufacturer  shall  not  be  held  responsible  for  any  inaccuracies  in  this  handbook  due  to  printing  or
transcription errors; the designs in the figures are purely indicative. The Manufacturer also reserves the right
to make any modifications to the products as may be considered necessary or useful, also in the interests
of the user, without jeopardizing the main functional and safety features of the products themselves. 

This

cook  top  was  designed  to  be  used  exclusively  as  a  cooking  appliance:  any  other  use  (such  as
heating rooms) is to be considered improper and dangerous.

(01075UK) 

INSTRUCTIONS AND ADVICE FOR THE

USE, INSTALLATION AND MAINTENANCE

OF BUILT-IN ELECTRIC HOBS

SMEG S.p.A.
Via Leonardo da Vinci, 4
42016 GUASTALLA - ITALIA

TIPO:  PAZ04
MOD.: SE435S

Summary of Contents for SE435S













Reviews: