75
Instructions for the user
11.2 Positioning the oven
The oven is designed for mounting into any piece of furniture as long as it
is heat-resistant. Proceed according to the dimensions shown in Figures
1
,
2
and
3
. For installing under a work top, follow the dimensions given in
Figure
1
-
3
. When installing under worktops incorporating combined hobs,
a gap of at least 110 mm must be left from any side wall, as shown in
figure
1
.
When installing in tall units, comply with the dimensions shown in figure
1
-
2
, bearing in mind that the top/rear of the unit must have an opening 80-90
mm deep. Tighten the 2 screws
A
inside the frame (fig.
1
). For installing
beneath a non-integrated top, allow for a rear and bottom clearance as
shown in Figure
1
(ref.
B
). See the relevant instructions for fitting and
securing the hob.
