manualshive.com logo in svg

Smeg SC061X-8, Manual

Share
Download
Smeg SC061X-8 Manual Download Page 1

51

Contents

IINSTRUCTIONS FOR THE USER: these instructions contain user
recommendations, a description of the controls and the correct
procedures for cleaning and maintenance of the appliance.

INSTRUCTIONS FOR THE INSTALLER: these are intended for the qualified
technician who must install the appliance, set it functioning and carry out
an inspection test.

1.

INSTRUCTIONS FOR USE ......................................................................... 52

2.

SAFETY PRECAUTIONS ............................................................................ 54

3.

ENVIRONMENTAL RESPONSIBILITY........................................................ 56

4.

GET TO KNOW YOUR OVEN...................................................................... 57

5.

AVAILABLE ACCESSORIES ....................................................................... 58

6.

USING THE OVEN ...................................................................................... 60

7.

COOKING WITH THE OVEN....................................................................... 74

8.

CLEANING AND MAINTENANCE ............................................................... 82

9.

EXTRAORDINARY MAINTENANCE ........................................................... 87

10. INSTALLING THE APPLIANCE ................................................................... 91

Summary of Contents for SC061X-8















































Reviews:

No comments

Brands by name

Popular brands

Load more brands