155620
In case you were not successful in repairing the malfunctions in
spite of the above suggestion chart, call the nearest authorized
service shop.
Repairing the failure arising from inappropriate connections or
use of the appliance is not covered by the guarantee, and the
repair expenses are paid by the customer.
* UKS: universal stability control - this function prevents excessive vibrations during spinning.
24
Failure
Possible cause
Remedy
Softener is not
completely rinsed,
or water is left in the
dispenser dish.
Sucking cover is not correctly
positioned or is clogged.
Clean the dispenser and
fi
rmly
fi
x the
cover to its place.
Washing time is longer
than usual.
Time indicated on the
display is corrected
during the washing
cycle.
• Low temperature of inlet water.
• Due to unevenly distributed
load, the machine has activated
the UKS*.
• Low mains voltage.
• There has been a failure in the
power supply.
• Clean water sensor is engaged.
• Washing program time may be up to
60% longer; however, this does not
imply a fault in the machine.
• Washing time is extended by the
power supply down-time.
• Time is prolonged for extra rinses.
Washing program does
not start.
FAILURE 2
Door is not properly closed.
Push it towards the machine.
Water does not enter
the machine.
FAILURE 3
Disturbed water inlet.
Check if:
• the water faucet is open,
• inlet pipe net
fi
lter is clean.
(Push the START button again).
Water is poorly
pumped out or not at
all (machine signals
FAILURE 7).
Water outlet is clogged.
Check if:
• the
fi
lter is clean,
• outlet pipe is not jammed,
• outlet pipe is positioned higher than
1 m.
(Push START knob again).
