Smeg HB96CSS-3 Installation And Use Manual Download Page 1

22

Contents

INSTRUCTIONS FOR THE USER: 

these contain user advice, description

of the commands and the correct procedures for cleaning and maintenance
of the appliance

.

INSTRUCTIONS FOR THE INSTALLER: 

these instructions are intended

for the 

qualified technician

 who must perform the installation, put it into

operation and test the appliance.

1.

INSTRUCTIONS FOR USE ........................................................ 23

2.

INSTRUCTIONS FOR DISPOSAL – OUR ENVIRONMENTAL 
CARE .......................................................................................... 24

3.

SAFETY INSTRUCTIONS .......................................................... 25

4.

KNOW YOUR APPLIANCE ........................................................ 26

5.

USING THE HOB........................................................................ 27

6.

CLEANING AND MAINTENANCE .............................................. 29

7.

INSTALLING THE APPLIANCE.................................................. 30

8.

GAS CONNECTION ................................................................... 36

9.

ADAPTATION TO DIFFERENT TYPES OF GAS ...................... 38

10. FINAL OPERATIONS FOR GAS APPLIANCES ........................ 40

Summary of Contents for HB96CSS-3




















Reviews: