Installation
86
The appliance can work in the following
modes:
•
220-240 V 2
~
3 x 4 mm²
three-core
cable.
•
220-240 V 3
~
4 x 2.5 mm²
four-core
cable.
•
220-240 V 1N
~
3 x 4 mm²
three-core
cable.
•
380-415 V 2N
~
4 x 2.5 mm²
four-core
cable.
•
380-415 V 3N
~
5 x 1.5 mm²
five-core
cable.
Fixed connection
Fit the power line with an all-pole circuit
breaker in compliance with installation
regulations.
The circuit breaker should be located near
the appliance and in an easily reachable
position.
Connection with plug and socket
Make sure that the plug and socket are of
the same type.
Avoid using adapters and shunts as these
could cause overheating and a risk of
burns.
5.3 Instructions for the installer
• The plug must be accessible after
installation. Do not bend or trap the
power cable.
• The appliance must be installed
according to the installation diagrams.
• If the appliance does not work correctly
after having carried out all the checks,
contact your local Authorised Service
Centre.
• Once the appliance has been installed,
please explain to the user how to use it
correctly.
The values indicated refer to the
cross-section of the internal
conductor.
The aforementioned power cables
are sized taking into account the
coincidence factor (in compliance
with standard EN 60335-2-6).
