USA
Instructions for the User
18
9 CLEANING AND MAINTENANCE
Cleaning is the only maintenance action that is required
normally.
Warning!
Cleaning must be done with the warming drawer
disconnected from the electrical power supply. Remove the
plug from the power socket or disconnect the warming
drawer power supply circuit.
Warning!
Do not use aggressive or abrasive cleaning
products, abrasive sponges or pointed objects since stains
or abrasion marks may appear.
Warning!
Do not use high pressure or steam jet cleaning
appliances.
9.1
Appliance front and control panel
The warming drawer can be cleaned using just a damp cloth.
If it is very dirty, add a few drops of washing-up liquid to the
washing water.
Wipe the surfaces dry using a dry cloth.
For stainless steel fronted crockery warmers,
special
products for treatment of stainless steel surfaces can be
used. These products prevent the surfaces becoming dirty
again for some time. Apply a thin layer of such a product on
the surface using a soft cloth.
9.2
Interior of the warming drawer
Clean the inside of the warming drawer regularly using a
damp cloth. If it is very dirty add a few drops of washing-up
liquid to the washing water.
Wipe the surfaces dry using a dry cloth.
Avoid water entering through the air circulation opening.
Only use the warming drawer again when it is completely
dry.
