Instructions for the user
89
Refer to the following diagram for setting the cleaning cycle duration:
CLEANING
DURATION
LIGHT DIRT
MEDIUM DIRT
HEAVY DIRT
120 MIN.
165 MIN.
210 MIN.
During the automatic cleaning cycle, the fans produce a more intense level of
noise due to a greater rotation speed; this is entirely normal and intended to
facilitate heat dissipation.
At the end of pyrolysis, the fans will continue to operate for long enough to avoid
overheating the walls of adjacent units and the front of the oven.
If the pyrolysis gives unsatisfactory results at minimum duration, it is
recommended to set a longer time for successive cleaning cycles.
9.10.2 Setting the cleaning cycle
Turn the function selection knob to
to select the cleaning cycle.
Press and hold down key
; press keys
or
to set the cycle duration.
The setting varies between a minimum of 2 hours and a maximum of 3 hours
and 30 minutes.
Press
to confirm the start of the pyrolysis.
Two minutes after the cleaning cycle (Pyrolysis) starts, a door
locking device will be tripped, preventing the door from being
opened. The appropriate light will switch on to indicate that the
locking device has been activated.
At the end of the cleaning cycle the door locking device will remain active until
the temperature inside the oven has reached a safety threshold. When the oven
has cooled down, collect the residues from automatic cleaning with a damp
microfibre cloth.
To select a cleaning cycle with a delayed start, after setting the duration press
. The time when the cleaning cycle will terminate will appear on the display.
Press and hold down key
, and press keys
or
to set the time at
which you wish to terminate the cleaning cycle.
It is not possible to select any functions once the door locking device has been
activated. Wait for
to go out.
