Installation
13
EN
4. Use 50 mm for the distance from the
side of the appliance to the bracket
holes.
5. Move the bracket onto the wall and
mark the position of the holes to be
drilled in the wall.
6. After drilling the holes in the wall, use
wall plugs and screws to fasten the
bracket to the wall.
7. Push the cooker towards the wall, and
at the same time, insert the bracket in
the plate fastened to the rear of the
appliance.
Instructions for floor mounting
(secondary system)
The secondary anti-tip device is to be
attached to the floor when it is not possible
to install the primary system. After having
positioned and leveled the appliance the
bracket has to be anchored to the floor and
engaged in the slots at the rear of the
appliance.
NOTE
: According to the type of
floor, the installer should supply the
suitable fastening systems (Type of
screw recommended
3
/
8"
).
Summary of Contents for CPF48UGMAN
Page 22: ...PAGE INTENTIONALLY LEFT BLANK...
