background image

51

Instructions for the user

10.6 VAPOR CLEAN: assisted oven cleaning

VAPOR CLEAN is an assisted cleaning procedure which facilitates the removal of dirt. Thanks to this
process, it is possible to clean the inside of the oven very easily. The dirt residues are softened by the
heat and water vapour for easier removal afterwards.

Before starting the assisted cleaning cycle, make sure that the oven does not contain any foods or large
spills from previous cooking operations.

Carry out assisted oven cleaning operations only when the oven is cold.

10.6.1Before starting the assisted cleaning cycle

Completely remove all accessories from inside the oven. The roof
lining can be left inside the oven (where present).

Pour approx. 40 cc of water onto the floor of the oven (as shown in
the figure). Make sure it does not overflow out of the cavity.

Spray a water and washing up liquid solution inside the oven using a
spray nozzle. Aim the spray towards the oven cavity. 
At the end of this process, close the door and set the cleaning cycle.

Do not spray excessive amounts of the water and washing up liquid solution. We recommend spraying
approx. 20 times at the most.

Summary of Contents for CO68CMA





























Reviews: