background image

Use

60

First use

1. Remove any protective film from the 

outside or inside of the appliance, 
including accessories.

2. Remove any labels (apart from the 

technical data plate) from the 
accessories and from the cooking 
compartments.

3. Remove and wash all the appliance's 

accessories (see 4 Cleaning and 
maintenance).

Oven cavity

4. Heat the empty oven at the maximum 

temperature to burn off any residues left 
by the manufacturing process.

3.1 Using the accessories

Racks and trays

Racks and trays have to be inserted into the 
side guides until they come to a complete 
stop.

The mechanical safety locks that prevent the 
rack from being taken out accidentally have 
to face downwards and towards the oven 
back.

High temperature inside the 
storage compartment during use

Danger of fire or explosion

• Do not spray any spray product near the 

appliance.

• Do not use or leave flammable materials 

near the oven or the storage 
compartment.

• Do not use plastic cookware or 

containers for cooking.

• Do not place sealed tins or containers in 

the oven cavity.

• Do not leave the appliance unattended 

during cooking operations where fats or 
oils could be released.

• Remove all trays and racks which are 

not required during cooking.

Gently insert racks and trays into 
the oven until they come to a stop.

Clean the trays before using them 
for the first time to remove any 
residues left by the manufacturing 
process.

Summary of Contents for Classica Concerto Series















































Reviews: