background image

Use

25

EN

3.6 Using the storage compartment

The storage compartment is at the bottom of 
the cooker. To open it, pull the handle 
towards you. It can be used to store 
cookware or metallic objects necessary 
when using the appliance.

3.7 Cooking advice

General advice

• Use a fan assisted function to achieve 

consistent cooking at several levels.

• It is not possible to shorten cooking times 

by increasing the temperature (the food 
could be overcooked on the outside and 
undercooked on the inside).

• For the same total weight, cooking time 

will be greater for cooking a whole 
piece than when it is cut into smaller 
pieces.

Advice for cooking meat

• Cooking times vary according to the 

thickness and quality of the food and to 
consumer taste.

• Use a meat thermometer when roasting 

meat, or simply press on the roast with a 
spoon. If it is hard, it is ready; If not, it 
needs another few minutes cooking.

Advice for cooking with the Grill

• Meat can be grilled even when it is put 

into the cold oven or into the preheated 
oven if you wish to change the effect of 
the cooking.

• When using the Fan with grill function, 

we recommend that you preheat the 
oven before grilling.

• We recommend placing the food at the 

centre of the rack.

• With the Grill function, we recommend 

that you turn the temperature knob to the 
maximum value to optimise cooking.

Advice for cooking desserts/pastries and 
biscuits

• Use dark metal moulds: They help to 

absorb the heat better.

• The temperature and the cooking time 

depend on the quality and consistency 
of the dough.

• When cooking on multiple levels, food 

should ideally be positioned on the 
second and fourth shelves; increase 
cooking time by a few minutes and only 
used fan functions.

• To check whether the dessert is cooked 

right through: At the end of the cooking 
time, put a toothpick into the highest point 
of the dessert. If the dough does not stick 
to the toothpick, the dessert is cooked.

• If the dessert collapses when it comes out 

of the oven, on the next occasion reduce 
the set temperature by about 10°C, 
selecting a longer cooking time if 
necessary.

• The cooking time for meringues and 

choux pastry will vary depending on the 
size.

Summary of Contents for Classica C7GPX9

















































Reviews: