background image

DESCRIPTION  -  39

91477A593/C

e

Control panel

1 Minute minder knob 

Allows you to set manual cooking or a minute 
minder timer with automatic oven switch-off at 
the end of cooking. 

2 Temperature knob 

This knob allows you to select the cooking 
temperature. Turn the knob clockwise to the 
required value, between the minimum and 
maximum setting.

3 Indicator light 

The indicator light comes on to indicate that the 
oven is heating up. It turns off as soon as it 
reaches the set temperature. It flashes regularly 
to indicate that the temperature set inside the 
oven is kept constant.

4 Function knob

The oven’s various functions are suitable for 
different cooking modes. After selecting the 
required function, set the cooking temperature 
using the temperature knob

5 Hob burner knobs

For lighting and adjusting the hob burners. Press 
and turn the knobs anti-clockwise to 

 in 

order to light the relative burners. Turn the knobs 
to the zone between the maximum 

 and 

minimum 

 setting to adjust the flame. Return 

the knobs to the 

 position to turn off the 

burners.

Other parts

Shelves

The appliance features shelves to position trays 
and racks at different heights. The insertion 
heights are indicated from the bottom upwards 
(see General description).

Cooling fan

The fan cools the oven and comes into 
operation during cooking. The fan causes a 
steady outflow of air that exits from the rear of 

the appliance and which may continue for a 
brief period of time even after the appliance has 
been turned off.

Interior lighting

The appliance’s interior lighting comes on:
• When the door is opened.
• When any function is selected, apart from 

the  

function.

Accessories

• Not all accessories are available on some 

models.

• The accessories intended to come into 

contact with food are made of materials that 
comply with the provisions of current 
legislation.

• Original supplied and optional accessories 

can be requested to Authorised Assistance 
Centres. Use only original accessories 
supplied by the manufacturer.

Trivet

Useful when using small cookware.

Do not obstruct ventilation openings 
and heat dispersal slots.

When the door is open, it is not possible 
to turn off the interior lighting.

Summary of Contents for Classica Aesthetic SX91GM



























Reviews: