background image

42  -  USE

91477A593/C

List of traditional cooking functions

STATIC

CIRC BOTTOM

GRILL

FAN ASSISTED

TURBO

ECO

VAPOR CLEAN (on some models only)

Cooking advice

General advice

• Use a fan assisted function to achieve 

consistent cooking at several levels.

• It is not possible to shorten cooking times by 

increasing the temperature (the food could 
be overcooked on the outside and 
undercooked on the inside).

Advice for cooking meat

• Cooking times vary according to the 

thickness and quality of the food and to 
consumer taste.

• Turn the food to brown on both sides.
• Use a meat thermometer when roasting 

meat, or simply press on the roast with a 
spoon. If it is hard, it is ready; if not, it needs 
to be cooked for a few more minutes.

Advice for cooking with the Grill

• Meat can be grilled even when it is put into 

the cold oven or into the preheated oven if 
you wish to change the effect of the 
cooking.

• With the Fan with grill function (if present), 

we recommend that you preheat the oven 
before grilling.

• We recommend placing the food at the 

centre of the rack.

• With the Grill function, we recommend that 

you set the temperature to the maximum 
value to optimise cooking.

Advice for cooking desserts/pastries and 
biscuits

• Use dark metal moulds: They help to absorb 

the heat better.

• The temperature and the cooking time 

depend on the quality and consistency of 
the dough.

• To check whether the dessert is cooked right 

through: At the end of the cooking time, put 
a toothpick into the highest point of the 
dessert. If the dough does not stick to the 
toothpick, the dessert is cooked.

• If the dessert collapses when it comes out of 

the oven, on the next occasion reduce the 

Not all functions are available on some 
models.

Traditional cooking, ideal for preparing 
a single dish. For example cooking 
roast meats, fatty meats, bread, pies.

Allows you to quickly finish cooking 
food that is already cooked on the 
surface but not internally. Ideal for 
quiches, suitable for all kinds of dishes.

Produces excellent grilling and 
gratinating results. When used at the 
end of cooking, gives a uniform 
browning to dishes.

Intense and uniform cooking. Ideal for 
biscuits, cakes and cooking on more 
than one level.

Allows quick cooking on multiple 
shelves without mixing the aromas. 
Perfect for large volumes that call for 
intense cooking.

This function is particularly suitable for 
cooking on a single shelf with low 
energy consumption.
It is recommended for all types of food 
except those that may produce a large 
amount of moisture (e.g. vegetables).
To obtain maximum energy savings and 
reduce cooking times, it is 
recommended to place food in the 
oven without preheating.

When using the ECO function, avoid 
opening the door during cooking.

Cooking (and preheating) times are 
longer with the ECO function and may 
depend on the amount of food in the 
oven.

This function facilitates cleaning using 
the steam produced by a small amount 
of water poured onto the depression on 
the bottom.

Summary of Contents for Classica Aesthetic SX91GM



























Reviews: