background image

The environment - Recycling instructions

26

2. RECYCLING INSTRUCTIONS - OUR ENVIRONMENT POLICY

Our household appliances are only packaged using non-pollutant, environment-friendly, recyclable
materials. Please help by disposing of the packing correctly. Find the addresses of collection, recycling
and disposal centres from your retailer or from the competent local organisations.
Never leave all or part of the packaging lying around. They can constitute a suffocation hazard for
children, especially the plastic bags.
Your old appliance also needs to be disposed of correctly.

Important: 

deliver the appliance to your local organisation authorised to collect scrapped appliances.

Correct disposal means intelligent recycling of valuable materials. Refrigeration appliances contain
gases which may damage the environment; it is therefore important to ensure that the refrigeration
circuit pipelines are not damaged until the competent service has taken delivery of the appliance.
Before scrapping your appliance it is important to remove doors and leave shelves in position as for use,
to ensure that children cannot accidentally become trapped inside during play. Also, cut the power
supply lead and remove it and the plug.

Summary of Contents for C92GMX





















Reviews: