Use
76
3.6 Programmer clock
Value decrease key
Clock key
Increase key
Setting the time
On the first use, or after a power failure, the
digits
will be flashing on the
appliance’s display.
1. Hold down the clock key
for two
seconds. The dot between the hours and
the minutes flashes.
2. The time can be set via the value
increase key
and value decrease
key
. Keep the key pressed in to
increase or decrease rapidly.
3. Wait 7 seconds. The dot between the
hours and the minutes stops flashing.
4. The symbol
on the display indicates
that the appliance is ready to start
cooking.
Vapor Clean
This function makes cleaning easier
using the steam produced by a little
quantity of water poured onto the
appropriate groove placed on the
bottom (see section “Cleaning and
maintenance”).
Ensure that the programmer clock
shows the cooking duration
symbol
, otherwise it will not
be possible to turn on the oven.
Press the key
to reset the
programmer clock.
If the time is not set, the oven will
not switch on.
To change the time, hold down the
value increase key
and value
decrease key
at the same time
for two seconds, then set the time.
Summary of Contents for C6IMXI9
Page 48: ......