background image

Dear Customer,

Thank you for having purchased one of our products.

We are certain that this new, modern, functional and practical appliance, built with the very

highest quality materials, will meet your requirements in the best possible way. This appliance is

easy to use. It is, however, important to thoroughly read the instructions in this handbook in order

to obtain the best results.

These instructions are only valid for the countries of destination, the identification symbols of

which are indicated on the cover of the instruction manual and on the appliance itself.

The manufacturer shall not be held responsible for any damages to persons or property
caused by incorrect installation or use of the appliance.

The Manufacturer shall not be held responsible for any inaccuracies in this handbook due to printing or
transcription errors; the designs in the figures are purely indicative. The Manufacturer also reserves the right
to make any modifications to the products as may be considered necessary or useful, also in the interests
of the user, without jeopardizing the main functional and safety features of the products themselves.

COD. 01101SM - 22.04.2004

INSTRUCTIONS AND ADVICE FOR THE

USE, INSTALLATION AND MAINTENANCE

OF OUR BUILT-IN ELECTRIC HOB

SMEG S.p.A.

Via Circonvallazione Nord, 36

42016 GUASTALLA - ITALIA

TIPO:  PAZ04

MOD.: SA435X - 1

Summary of Contents for Built-in Electric Hob SA435X-1









Reviews: