background image

Instructions for the User

105

11.5 Timer

The programmer can also be used as an ordinary timer. Press the 

 key and the display will show the

figures 

; keep it pressed and simultaneously press the value modification keys 

 or 

.

 

When

the key is released the programmed count will start and the display will show the current time and the
symbol 

After the setting, to display the time left press the 

 key.

In timer mode, the system will not cut out operation of the oven at the end of the set time.

11.6 Adjusting the buzzer volume

The buzzer volume can be varied (3 settings) while it is in operation by pressing the 

 key.

11.7 Stopping the buzzer

The buzzer stops automatically after seven minutes. It can be stopped in manual mode by pressing the

 and 

 keys together. To switch off the oven, return

 

all the knobs to the 0 setting in sequence.

11.8 Deleting the data set

With the program set, keep the key of the function for deletion pressed, while at the same time setting
the value 

 by pressing the value modification keys 

 or 

. The programmer will interpret

deletion of the duration as the end of cooking.

11.9 Modifying the data set

The cooking data set can be modified at any moment by pressing the function key and at the same time
using the value modification keys 

 or 

.

Summary of Contents for B71MPX5























Reviews: