Smeg A4BL-81 Manual Download Page 50

Page: 50 / 50

Installation

106

Assembling the upstand

The upstand must always be positioned and
secured correctly on the appliance.
1. Position the upstand on the top, taking

care to line up holes

with holes

2. Secure the upstand to the top by

tightening screws

5.5 Instructions for the installer

• The plug must be accessible after

installation. Do not bend or trap the
power cable.

• The appliance must be installed

according to the installation diagrams.

• Do not try to unscrew or force the

threaded elbow of the fitting. You may
damage this part of the appliance, which
may void the manufacturer’s warranty.

• Use soap and water to check for gas

leaks on all connections.

DO NOT

use

naked flames to find leaks.

• Turn on all the burners separately and at

then all together to make sure that the
gas valve, burner and ignition are
working properly.

• Turn the burner knobs to the minimum

position and check that the flame is
stable for each individual burner and all
the burners together.

• If the appliance does not work correctly

after having carried out all the checks,
contact your local Authorised Service
Centre.

• Once the appliance has been installed,

please explain to the user how to use it
correctly.

The upstand provided is an
integral part of the product; it must
be fastened to the appliance prior
to installation.

Summary of Contents for A4BL-81



















































Search results

Summary of Contents for A4BL-81

Reviews:

Related manuals for A4BL-81

Brands by name

Popular brands

Smeg A4BL-81, Manual

Search results

Summary of Contents for A4BL-81

Reviews:

Related manuals for A4BL-81

Brands by name

Popular brands