Riello ProtoNode Start-up Guide
Page 23 of 43
7
HOW TO START THE INSTALLATION OVER: CLEARING PROFILES
After setting a local PC to the same subnet as the ProtoNode (
Section
), open a web browser
on the PC and enter the IP Address of the ProtoNode; the default address is 192.168.1.24.
If the IP Address of the ProtoNode has been changed by previous configuration, the assigned IP
Address will need to be obtained from the network administrator.
The Web Configurator is displayed as the landing page.
At the bottom-
left of the page, click the “Clear Profiles and Restart” button.
Once restart is complete, all past profiles discovered and/or added via Web configurator are
deleted. The unit can now be reinstalled.
