Stulz Driver Manual
Page 4 of 16
STULZ DESCRIPTION
The Stulz driver allows the transfer of data from a Stulz device using the Stulz monitoring protocol version
1.7. The FieldServer can act as a Client.
Currently, only the C6000 microcontroller is supported as the protocol only specifies read capabilities on
that unit.
The Client is configurable to read all information into separate data points and supports writing to selected
points as specified below.
There is support for the following formats:
•
Float values
•
Binary values
•
Integer values
Max Nodes Supported
FieldServer Mode
Nodes
Comments
Client
32
The protocol supports one Client per system, but 32 devices can be
read on the system.