-22-
NO.ZK2-OM00501-B
Function Setting
■
Function selection mode
In measurement mode, press the
button for 2 seconds or longer to display [F 0]. Select to display the
function setting to be changed, [F ].
Press the
button for 2 seconds or longer in function selection mode to return to measurement mode.
■
Default setting
The default settings are as follows
[F 0] Unit selection function
See page 24
Item
Default setting
SI unit fixed Unit conversion
function
kPa
[F 1] Setting of OUT1
See page 25
Item
Description
Default setting
Output mode
Select the hysteresis mode.
Hysteresis mode
Reversed output
Selects which type of switch output is used, normal or reversed.
Normal output
Pressure setting
Sets the ON or OFF point of the switch output.
-70 kPa(P_1)
Hysteresis
Set the hysteresis to prevent chattering.
10 kPa(H_1)
[F 2] Setting of OUT2
See page 27
Same setting as [F 1] OUT1.
Item
Description
Default setting
Supply pilot valve
at signal ON
Sets the ON point of the supply pilot valve signal
5 kPa(H_2)
Supply pilot valve
at signal OFF
Sets the OFF point of the supply pilot valve signal
0 kPa(H_3)
Set the range in which
the supply pilot valve
input is prohibited
Sets the range where the ON point of the supply pilot valve signal
is not allowed to be input.
1 kPa(H_4)
A
A
