![background image](http://html.mh-extra.com/html/smc-networks/tigerswitch-series/tigerswitch-series_installation-manual_1299401002.webp)
2
Installation Steps
To install the SMC TigerSwitch modules, follow these steps:
1. Insert the module into an SMC6624M module slot and secure the
retaining screws.
2. Reset or reboot the SMC6624M switch.
3. Connect the network cable to the module and check the module and
network device for correct operation.
Details on these steps are provided in the rest of this document.
Installation Notes
Please read these notes before proceeding.
■
The SMC TigerSwitch modules are supported in the SMC
TigerSwitch 10/100 SMC6624M switch only. Do not try to install the
modules in any other SMC TigerSwitch devices.
■
It is
not
necessary to turn off power to the SMC6624M switch before
installing a module into it. You can install a module while the switch
is powered on, but you must reset or reboot the switch after installing
the module to initialize and activate it.
Please see the TigerSwitch 10/100 SMC6624M Installation Guide for more
information on installing the modules.