Copyright
©
2010 SMC Networks
4
e
g
a
P
All Rights Reserved
I/M SMCMT01-Z rev. 1.0
9/1/10
SMCMT01-Z Motion Sensor Quick Start Guide
Compliances
Limitations of Security Products
FCC Notice
This device has been designed, constructed, and tested with
for compliance with FCC Rules that regulate intentional and
unintentional radiators. As the user of this device, you are
not permitted to make any alterations or modifications to
this equipment or to use it in any way that is inconsistent
with the information described in this quick-start guide,
without the express written permission of SMC Networks.
Doing so will void your warranty to operate this equipment.
This device complies with Part 15 of the FCC rules.
Operation of this device is subject to the following two
conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
The SMCMT01-Z contains FCCID:JI5-SMCZB01 and
ICID:4137A-SMCZB01. The “IC” designation preceding the
radio certification number indicates that this device
complies with the Industry of Canada specifications.
ETL Notice
This device complies with all ETL and ETLC safety
requirements.
UL and ULC Notices
This device complies with UL Standard UL639 and ULC
Standard ULC S306.
Security products and alarm systems do not offer guaranteed
protection against burglary, fire, or other emergencies. They
may fail to warn for diverse reasons, including (but not
limited to): power failure, dead batteries, improper
installation, coverage , coverage areas overlooked during
installation, defeat by technically sophisticated intruders,
component failure, or inadequate maintenance. Alarm
systems should be checked weekly to ensure that all devices
are working properly.
AN ALARM SYSTEM IS NOT A SUBSTITUTE FOR INSURANCE.