Configuring the
Gateway
85
SMCD3GNV Wireless Cable Modem Gateway User Manual
Figure 46. Example of Port Forwarding Menu
Adding a Port Forwarding Rule
To add a port forwarding rule:
1. If the Port Forwarding menu is not displayed, click
Advanced
in the menu bar, and then
click the
Port Forwarding
submenu.
2. Confirm that
Enabled
is selected (green) next to
Enable Port Forwarding
. If it isn’t click
Enabled
.
3. Click the
ADD PORT FORWARD
button. The Add Service menu appears (see Figure 47).
4. Complete the fields in the Add Service menu (see Table 19).
5. Click
SAVE
to save your settings (or click
CANCEL
to discard them). If you click
SAVE
,
the port forwarding rule appears below
Port Forwarding
on the Port Forwarding menu.
6. To add more port forwarding rules, repeat steps 3 through 5.
7. To edit a port forwarding rule, click the
EDIT
button next to the rule you want to modify, edit
the settings on the Add Service menu (see Table 18), and click
SAVE
.
8. To delete a port forwarding rule, click the
X
next to the rule. When the Delete Port
Forwarding Rule message appears, click
OK
to delete the port forwarding rule or
CANCEL
to retain it. If you clicked
OK
, the rule is removed from the
Port Forwarding
area on the
Port Forwarding menu.