SMC Networks SMCD3GNV, User Manual, Page: 161 / 217

Configuring the
Gateway’s mso Interface
161
SMCD3GNV Wireless Cable Modem Gateway User Manual
Figure 94. Example of Port Triggering Menu
Adding a Port Triggering Rule
To add a port triggering rule, perform the following procedure from the Port Triggering menu.
1. Next to
Enable Port Triggering
, click
Enabled
.
2. Click the
ADD PORT FORWARD
button. The Port Triggering Add menu appears (see
Figure 95).
3. Complete the fields in the Port Triggering Add menu (see Table 47).
4. Click
SAVE
to save your settings (or click
CANCEL
to discard them). If you click
SAVE
,
the port triggering rule appears below
Port Triggering
on the Port Triggering menu.
5. To add more port triggering rules, repeat steps 2 through 4.
6. To edit a port triggering rule, click the
EDIT
button next to the rule you want to modify, edit
the settings on the Port Triggering Add menu (see Table 47), and click
SAVE
.
7. To delete a port triggering rule, click the
X
next to the rule. When the Delete Port Triggering
Rule message appears, click
OK
to delete the port triggering rule or
CANCEL
to retain it. If
you clicked
OK
, the rule is removed from the
Port Triggering
area on the Port Triggering
menu.