Configuring Your Gateway
88
SMCD3GN-RRR Wireless Cable Modem Gateway User Manual
2. Click
OK
to reboot the Gateway or click
Cancel
to not reboot it. If you clicked
OK
, the
reboot is complete when the
POWER
LED stops blinking and you will need to log in to the
Web interface again.
Figure 55. Precautionary Message When Rebooting the Gateway
VViieew
wiinngg SSttaattuuss IInnffoorrm
maattiioonn
The Status page is a read-only screen that shows the:
!
Connection status for your Gateway’s WAN, LAN, and wireless interfaces
!
Firmware and hardware versions
!
Any illegal attempts to access your network
!
Information about all DHCP clients currently connected to your Gateway
!
Network and cable modem system event logs, with buttons for clearing, refreshing, or
sending the logs to a drive location (before you can send the logs to a drive location,
enable email and syslog notification on the Email/Syslog Alert menu - see page 80)
!
LAN client log, with buttons for refreshing and releasing IP addresses
The Status menu appears when you first log in to the Web management interface. You can
also display it by clicking
Status
in the menu bar. Figure 56 shows an example of the status
information shown.