![background image](http://html1.mh-extra.com/html/smc-networks/smcd3g/smcd3g_user-manual_1299806018.webp)
Configuring Your Computer
for TCP/IP
Configuring Microsoft Windows 2000
Use the following procedure to configure your computer if your computer has Microsoft
Windows 2000 installed.
1. On the Windows taskbar, click
Start
, point to
Settings
, and then click
Control Panel
.
2. In the Control Panel window, double-click the
Network and Dial-up Connections
icon. If
the Ethernet adapter in your computer is installed correctly, the
Local Area Connection
icon appears.
3. Double-click the
Local Area Connection
icon for the Ethernet adapter connected to the
Gateway. The Local Area Connection Status dialog box appears (see Figure 5).
Figure 5. Local Area Connection Status Window
4. In the Local Area Connection Status dialog box, click the
Properties
button. The Local
Area Connection Properties dialog box appears.
5. In the Local Area Connection Properties dialog box, verify that
Internet Protocol (TCP/IP)
is checked. Then select
Internet Protocol (TCP/IP)
and click the
Properties
button.
6. Click
Obtain an IP address automatically
to configure your computer for DHCP.
7. Click the
OK
button to save this change and close the Local Area Connection Properties
dialog box.
8. Click
OK
button again to save these new changes.
9. Restart your computer.
18
SMCD3G Cable Modem Gateway User Manual
Summary of Contents for SMCD3G
Page 1: ......
Page 49: ...Configuring Your Gateway Figure 27 Trigger Menu 49 SMCD3G Cable Modem Gateway User Manual...
Page 68: ......