![background image](http://html1.mh-extra.com/html/smc-networks/smc8014wn/smc8014wn_administrators-manual_1299802063.webp)
錯誤
!
尚未定義樣式。
63
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Figure 36. Special Application Menu
To enable port triggering:
1. In the Special Application menu, check
Enable Triggering
if it is unchecked and click the
Apply
button. The Trigger Table becomes available.
2. Click the
Add
button below
Trigger Table
. The Trigger menu appears (see Figure 37).
3. Complete the fields in the Trigger menu (see Table 17).
4. Click
Apply
. (Or click
Back
to return to the Trigger menu or
Cancel
to cancel any
selections you made.) If you clicked
Apply
, the trigger is added to the
Trigger Table
on
the Special Application menu.
5. To configure additional triggers (up to 20), repeat steps 1 through 4. When you finish, click
Apply
in the Special Application menu to save your settings.
6. To change the settings for a trigger, click the radio button to the left of the trigger in the
Trigger Table
and click the
Edit
button. When the Trigger menu appears, edit the settings
as necessary (see Table 17) and click
Apply
. Click
Apply
in the Special Application menu
to save your settings.
7. To delete a trigger, click the radio button to the left of the trigger in the
Trigger Table
and
click the
Delete
button. No precautionary message appears before you delete a trigger.
Click
Apply
in the Special Application menu to save your settings.