![background image](http://html1.mh-extra.com/html/smc-networks/smc8014wn/smc8014wn_administrators-manual_1299802059.webp)
錯誤
!
尚未定義樣式。
59
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Adding Predefined Filters
The Gateway lets you select traffic you want to block from the LAN to the Internet.
1. In the Access Control menu, check
Enable Access Control
if it is not checked and click
the
Apply
button. The remaining fields in the menu become available.
2. Under
Predefined Filtering Table
, click the
Add
button. The Predefined Filter menu
appears (see Figure 34).
3. Complete the fields in the Predefined Filter menu (see Table 15).
4. Click
Apply
. (Or click
Back
to return to the Access Control menu or
Cancel
to cancel any
selections you made.) If you clicked
Apply
, the predefined filter is added to the
Predefined
Filtering Table
on the Access Control menu.
5. To define additional filters for access control (up to 35, including customer-defined filters),
repeat steps 1 through 4. When you finish, click
Apply
in the Access Control menu to save
your settings.
6. To change the settings for a predefined filter, click the radio button to the left of the service
in the
Predefined Filtering Table
and click the
Edit
button. When the Predefined Filter
menu appears, edit the settings as necessary (see Table 15) and click
Apply
. Click
Apply
in the Access Control menu to save your settings.
7. To delete a predefined filter, click the radio button to the left of the filter in the
Predefined
Filtering Table
and click the
Delete
button. No precautionary message appears before
you delete a predefined filter. Click
Apply
in the Access Control menu to save your
settings.
Figure 34. Predefined Filter Menu