![background image](http://html1.mh-extra.com/html/smc-networks/smc8014wn/smc8014wn_administrators-manual_1299802053.webp)
錯誤
!
尚未定義樣式。
53
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Adding Predefined Services
Using the following procedure, you can select well-known services and specify the LAN host
IP address(es) that will provide the service to the Internet.
1. In the Port Forwarding menu, click the
Add
button below the
Predefined Service Table
.
The Predefined Service menu appears (see Figure 30).
2. Complete the fields in the Predefined Service menu (see Table 13).
3. Click
Apply
. (Or click
Back
to return to the Port Forwarding menu or
Cancel
to cancel any
selections you made.) If you clicked
Apply
, the predefined service is added to the
Predefined Service Table
on the Port Forwarding menu.
4. To configure additional predefined services (up to 100, including customer-defined
services), repeat steps 1 through 3.
5. To change the settings for a predefined service, click the radio button to the left of the
service in the
Predefined Service Table
and click the
Edit
button. When the Predefined
Service menu appears, edit the settings as necessary (see Table 13) and click
Apply
.
6. To delete a predefined service, click the radio button to the left of the service in the
Customer Defined Service Table
and click the
Delete
button. No precautionary message
appears before you delete a predefined service.
Figure 30. Predefined Service Menu