![background image](http://html1.mh-extra.com/html/smc-networks/smc8014wn/smc8014wn_administrators-manual_1299802036.webp)
錯誤
!
尚未定義樣式。
36
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Table 6. System Settings Menu Option
Option
Description
Disable All Residential
Gateway Functions
Enables or disables all residential Gateway functions.
•
Checked = all residential Gateway functions are disabled.
•
Unchecked = all residential Gateway functions are enabled. (default)
Router Name
The name you want to assign to the Gateway. Assign a name so that this device will not be confused
with other devices on your wireless network. We recommend you use a name that is meaningful to you
so you can identify the Gateway easily.
Use router name for
command line prompt
Determines whether the router name you specified appears in DOS command line prompts (for
example, if you Telnet into the Gateway).
•
Checked = router name appears in command line prompts.
•
Unchecked = router name does not appear in command line prompts. (default)
Enable UPnP
Configures the Gateway as a Universal Plug and Play (UPnP) Internet gateway. UPnP allows for
dynamic connectivity between devices on a network. A UPnP-enabled device like the Gateway can
obtain an IP address, advertise its capabilities, learn about other connected UPnP devices and then
communicate directly with those devices. The same device can end its connection cleanly when it
wishes to leave the UPnP community. The intent of UPnP is to support zero-configuration, "invisible"
networking of devices including intelligent appliances, PCs, printers, and other smart devices using
standard protocols.
•
Checked = UPnP is enabled on the Gateway. (default)
•
Unchecked = UPnP is disabled on the Gateway.
Enable HNAP
Configures the Gateway as a Home Network Administration Protocol (HNAP) device. HNAP allows the
Gateway to be configured and managed by remote entities, such as Network Magic or any software
application that discovers and manages network devices.
•
Checked = HNAP is enabled on the Gateway.
•
Unchecked = HNAP is disabled on the Gateway. (default)