![background image](http://html1.mh-extra.com/html/smc-networks/smc8014wn/smc8014wn_administrators-manual_1299802015.webp)
錯誤
!
尚未定義樣式。
15
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
Restoring Factory Defaults
The Reset button on the rear panel can be used to return the Gateway to its factory default
settings. As a result, any changes made to the Gateway’s default settings will be lost.
If you do not have physical access to the Gateway, you can use the GUI to either power
cycle the Gateway (see “Reboot Menu” on page 79) or return the Gateway to its factory
default settings (see “Restoring Factory Defaults” on page 77).
The following procedure describes how to use the Reset button to power cycle the Gateway
and return it to its original factory default settings.
1. Leave power plugged into the Gateway.
2. Find the Reset button on the rear panel, then press and hold it for at least 10 seconds.
3. Release the Reset button.
Rebooting the Gateway
If the Gateway has problems connecting to the Internet, hold down the Reset button on the
rear panel for 1 second and then release.