![background image](http://html1.mh-extra.com/html/smc-networks/smc5912/smc5912_user-manual_1300896037.webp)
3-2
I
NSTALLING
THE
S
TACK
Selecting a Site
TigerStack II 10/100 hubs can be mounted in a standard 19-inch
equipment rack or on a flat surface. Be sure to follow the
guidelines below when choosing a location.
u
The site should:
•
be able to maintain its temperature within 0° to 50° C and
its humidity within 0% to 90%, non-condensing
•
provide adequate space (approximately two inches) on all
sides for proper air flow
•
be accessible for installing, cabling and maintaining the
devices
•
allow the status LEDs to be clearly visible
u
Make sure twisted-pair cable is always routed away from power
lines, fluorescent lighting fixtures and other sources of electrical
interference, such as radios, transmitters, etc.
u
Make sure that a separate grounded power outlet that provides
100 to 240 VAC, 50 to 60 Hz, is within 8 feet (2.44 m) of each
device and is powered from an independent circuit breaker. As
with any equipment, using a filter or surge suppressor is
recommended.
Summary of Contents for SMC5912
