![background image](http://html1.mh-extra.com/html/smc-networks/smc-tigerswitch-10-100-smc6110l2/smc-tigerswitch-10-100-smc6110l2_installation-manual_1300892035.webp)
Connecting to the Console Port
3-7
3
Connecting to the Console Port
The DB-9 serial port on the switch’s back panel is used to connect to the switch for
out-of-band console configuration. The command-line-driven configuration program
can be accessed from a terminal or a PC running a terminal emulation program. The
pin assignments used to connect to the serial port are provided in the following table.
Figure 3-7 Serial Port (DB-9 DTE) Pin-Out
Wiring Map for Serial Cable
The serial port’s configuration requirements are as follows:
• Default Baud rate—9,600 bps
• Character Size—8 Characters
• Parity—None
• Stop bit—One
• Data bits—8
• Flow control—none
Table 3-1 Serial Cable Wiring
Switch’s 9-Pin
Serial Port
Null Modem
PC’s 9-Pin
DTE Port
2 RXD (receive data)
<---------------------------- 3 TXD (transmit data)
3 TXD (transmit data)
-----------------------------> 2 RXD (receive data)
5 SGND (signal ground) ------------------------------ 5 SGND (signal ground)
No other pins are used.
1
5
6
9
Summary of Contents for SMC TigerSwitch 10/100 SMC6110L2
