![background image](http://html1.mh-extra.com/html/smc-networks/smc-tigerswitch-10-100-smc6110l2/smc-tigerswitch-10-100-smc6110l2_installation-manual_1300892022.webp)
Introduction
1-4
1
Power Supply Socket
There is one power socket on the rear panel of the switch. The standard power
socket is for the AC power cord.
Figure 1-3 Power Supply Socket
Features and Benefits
Connectivity
• Eight dual-speed ports for easy Fast Ethernet integration and for protection of your
investment in legacy LAN equipment.
• Auto-negotiation enables each RJ-45 port to automatically select the optimum
communication mode (half or full duplex) if this feature is supported by the
attached device; otherwise the port can be configured manually.
• RJ-45 10/100BASE-TX ports with auto MDI/MDI-X.
• Unshielded (UTP) cable supported on all RJ-45 ports: Category 3 or better for
10 Mbps connections, Category 5 or better for 100 Mbps connections, and
Category 5, 5e or 6 for 1000 Mbps connections.
• IEEE 802.3-2005 Ethernet, Fast Ethernet, Gigabit Ethernet compliance ensures
compatibility with standards-based hubs, network cards and switches from any
vendor.
Table 1-2 System Status LEDs
LED
Condition
Status
PWR
On Green
The unit’s internal power supply is operating normally.
Off
The unit has no power connected.
Diag
On Green
The system diagnostic test has completed successfully.
Flashing Green
The system diagnostic test is in progress.
On Amber
The system diagnostic test has detected a fault.
Summary of Contents for SMC TigerSwitch 10/100 SMC6110L2
