![background image](http://html1.mh-extra.com/html/smc-networks/smc-520/smc-520_user-manual_1298885010.webp)
10
SMC-520 User Guide revision 1.3 SMC Ship Motion Control www.shipmotion.eu
1.6
SMC INSTRUMENTS CONFIGURATION SOFTWARE
The SMC configuration software is a PC application, after the sensor serial communication has been
connected the SMC Configuration Software can be used to set the sensor configuration and
communication parameters according to requirements.
The settings entered in the SMC Configuration software are written to the sensor. The settings are
stored in flash memory inside the sensor and are not dependent on power supply or battery power.
1.6.1
DEFAULT SETTINGS AT THE FACTORY
The sensor is delivered from SMC with a set of default parameters which can be changed from the
SMC IMU Configuration Software.
The factory default communication settings are as follows.
Baud Rate 38400
8 Databits
No parity
1 stop bits