![background image](http://html1.mh-extra.com/html/smc-networks/sj-1000-series/sj-1000-series_manual_1299383098.webp)
How to Order
V
Vacuum release valve manifold with restrictor
An order cannot be placed with only the manifold part
no. Be sure to order solenoid valves for mounting at
the same time while referring to the ordering example.
RoHS
SJ3A6
Series
Vacuum Release Valve with Restrictor
Plug-in
Connector Type
®
q
Vacuum release valve
with restrictor type
60
U
SS3J3
05
V
How to Order Manifold Assembly
Ordering example (
SS3J3-V60PD2-
m
)
· For the valve arrangement, the valve closest to the D side is consid-
ered the 1st station.
· Under the manifold part number, state the valves to be mounted in
order starting with the 1st station as shown in the figure. If the ar-
rangement becomes too complicated, specify the details on a mani-
fold specification sheet.
∗
When ordering a manifold, specify the part nos. of the valves to be
mounted on it (An order cannot be placed with only the manifold part no.)
The asterisk denotes the symbol for the assembly.
Prefix it to the part numbers of the solenoid valve, etc.
SS3J3-V60PD2-06D ········· 1 set (Manifold part no.)
∗
SJ3A6-5CU-DP ················ 4 sets (Non-polar type, with plug part no.)
∗
SJ3A6-5CZJ-P ················· 1 set (With switch, plug part no.)
∗
SJ3A6-5MZ-P ··················· 1 set (Individual wiring, lead wire length
300 mm, with plug part no.)
Individual wiring, lead wire length 300 mm,
with plug (24 VDC)
SJ3A6-5MZ-P (1 set)
With switch, plug (24 VDC)
SJ3A6-5CZJ-P (1 set)
Non-polar type, with plug (24 VDC)
SJ3A6-5CU-DP (4 sets)
SUP/EXH block
(D side mounting)
D side
U side
3
2
Stations
1
∗
This number also includes the blanking block assembly. For the blanking block assembly, please select double wiring
specifications.
S
m
: EX180 serial transmission
Symbol Stations
Note
01
1 station There are limitations on the station
number, depending on the serial
type. Refer to page 45 for details.
…
…
16
16 stations
S6B
: EX510 serial transmission
Symbol Stations
01
1 station
…
…
08
8 stations
PH
: Flat ribbon cable (10 pins)
Symbol Stations
01
1 station
…
…
04
4 stations
P
: Flat ribbon cable (26 pins)
Symbol Stations
01
1 station
…
…
12
12 stations
PG
: Flat ribbon cable (20 pins)
Symbol Stations
01
1 station
…
…
09
9 stations
F
: D-sub connector
Symbol Stations
01
1 station
…
…
12
12 stations
u
DIN rail length
specified
Nil
Standard length
2
2 stations Specify a length
longer than that of
the standard rail.
…
…
16
16 stations
∗
Specify the number of valve sta-
tions without exceeding the max.
number of stations.
w
Connector type
Symbol
Mounting position
Page
Note
FD
D-sub connector
23
Parallel wiring
PD
Flat ribbon cable 26 pins
PGD
Flat ribbon cable 20 pins
PHD
Flat ribbon cable 10 pins
S
m
EX180 serial transmission
45
Serial wiring
S6B
EX510 serial transmission
55
t
SUP/EXH block
mounting position
U
U side
D
D side
B
Both sides
M
∗
1
Special specifications
∗
1 Specify the required specifications
(including port sizes other than ø8)
on the manifold specification sheet.
r
Valve stations
e
Connector entry
With parallel wiring specifica-
tions, it is necessary to select
the connector entry direction
(1: upward, 2: lateral). For de-
tails, refer to page 23.
w
y
e
r
t
u
q
y
SUP/EXH block fitting specification
Nil
L
B
Straight fitting
X, PE port:
Elbow fitting
Elbow fitting
(Upward)
X, PE port:
Straight fitting
Elbow fitting
(Downward)
X, PE port:
Elbow fitting
∗
There is no need to enter anything when the SUP/EXH block mounting position “M” is selected. Also, this manifold comes
standard with external pilot specifications.
97