![background image](http://html1.mh-extra.com/html/smc-networks/sj-1000-series/sj-1000-series_manual_1299383097.webp)
Component Parts
Component Parts
<Filter replacement instructions>
If there are situations such as filter clogging, a drop in suction force, or
slow response time, stop operation and replace the filter.
1. Using a precision driver, remove the filter assembly (
!2
or
!4
) from the
main unit.
2. Turn the filter guide by hand and remove.
3. Replace the filter (
!3
or
!5
) and gently hand tighten the filter guide. At
this time, check that there is no foreign matter on the O-ring of the filter
assembly.
4. Return the filter assembly to the main unit. (Tightening torque: 0.12 N·m)
After tightening the plug (M-5P) with a tightening torque of 1 N·m, or
manually tightening, use the tightening tool and tighten it by 1/4 turn.
!3!5
Filter (5 pcs. included)
!2!4
Filter assembly (with filter)
∗
1 Set the operating torque of the restrictor of the restrictor block assembly to 0.3
N·m or less.
Construction
Adsorbing and Transferring System Circuit Example
Connector type
Cable type
Symbol: F2
Vacuum pressure side filter
Symbol: F1
Release pressure side filter
Symbol: F2
Vacuum pressure side filter
Symbol: F1
Release pressure side filter
1(P)
3/5(E)
2(B)
PS port
w
e
q
r
t
y
!0
u
i
o
!3 !2
!5
!4
!1
PS port
2(B)
3/5(E)
1(P)
!0 y t r q i e w u !1 !3
o !5
!4
(Shaded area)
!2
(Shaded area)
Filter guide
Filter
O-ring
Notch in screw
Filter guide
O-ring
Notch in screw
2(B)
Vacuum pad port
X
1(P)
Release pressure port
3/5(E)
Vacuum pressure port
SOL.a
SOL.b
Pressure switch, etc.
Vacuum pressure
switching valve
Filter
Vacuum side
Filter
Release side
SJ3A6
Release pressure switching valve
(Built-in restrictor)
SJ3A6
Series
Construction/Circuit Example
No.
Description
Material
Note
1
Spool valve assembly Resin/HNBR A side (for release pressure switching)
2
Spool valve assembly Resin/HNBR B side (for vacuum pressure switching)
3
Body
Zinc die-cast
—
4
Adapter plate
Resin
White
5
Pilot adapter
Resin
White
6
Pilot valve assembly
—
—
7
End cover
Resin
White
8
Restrictor block assembly
∗
1
Resin
White
9
Bottom cover
Resin
White
10
Light cover
Resin
Light blue
No.
Description
Part no.
Note
11
Plug
M-5P
PS port with plug
12
Filter assembly SJ3000-110-1A 1 μm White <Release pressure side>
13
Filter
SJ3000-107-1A 1 μm White <Release pressure side>, 5 pcs. included
14
Filter assembly SJ3000-110-2A 30 μm Light purple <Vacuum pressure side>
15
Filter
SJ3000-107-2A 30 μm Light purple <Vacuum pressure side>, 5 pcs. included
96
SJ
1000
2000
3000
Co
mmon
Spec
ifi
ca
tion
s
SJ3A6
Plug-in
EX180
EX510
Construction
D-
sub
Fla
t Ri
bb
on
Individual
Wiring
Individual
Wiring
Specific Product Precautions
Manifold Options
Made to Order
Common Spec. Construction
D-sub
Flat Ribbon
Serial
Non
Plug-in
Non
Plug-in
Plug-in