![background image](http://html1.mh-extra.com/html/smc-networks/sj-1000-series/sj-1000-series_manual_1299383084.webp)
For Connector Type/Individual Wiring
Regulator specifications (0.7 MPa specifications)
SJ3000
P
1(P) port regulation
Knob (Regulator orientation)
Wiring specification
Pressure switch/
Pressure gauge display orientation
The entry is the same as that of the standard model.
Digital pressure switch option (external wiring)
Display unit
Pressure switch/pressure gauge specifications
Fitting size
A
F
N
C8
*
Refer to Fig. 1.
*
Refer to Fig. 2.
*
If “D” is selected when the connector
(D-sub connector, flat ribbon cable)
entry direction is upward, the connector
may interfere with the pressure switch
wiring depending on the mounting
position. So, carefully check this point.
*
When the knob orientation is
lateral, the elbow fitting
(upward entry) cannot be
selected.
*
This option can be selected only when
the pressure switch/pressure gauge
specifications are “N” or “P.”
*
1 A fixed unit (MPa) digital pressure switch is
provided.
*
2 This product is for overseas use only according to
the New Measurement Act. (The SI unit type is
provided for use in Japan.) Both “MPa” and “psi”
are written on the unit display of the digital
pressure switch.
*
3 The digital pressure switch will be equipped with
the unit selection function, setting to psi initially.
*
4 For digital pressure switches
*
“Internal wiring” specifications mean that the wiring is
assigned to the centralized wiring on the manifold.
(For details, refer to “Electrical Wiring” on page 86.)
*
For the internal wiring specifications, select an
appropriate pressure switch according to the polarity
of the valve to be mounted.
*
For the serial manifold and non plug-in, “Q” and “S”
(internal wiring specifications) cannot be selected.
*
The analog pressure gauge is not applicable to the
copper-free specifications.
Fig. 2 Pressure switch/pressure gauge display orientation symbol
Fig. 1 Knob orientation (Regulator mounting orientation)
SJ3
60 (T)
S
Control method
0
*
1 Set the operating torque of the speed
controller to 0.1 N·m or less.
*
Applicable only to the SJ3000 series
*
Specify S0 or S1 at the end of the valve part no.
*
Be sure to apply the pressure from the 1(P) port of the manifold before using the SUP/
EXH block assembly with regulator and pressure switch.
*
For details on the regulator and electric circuit of the external wiring specifications,
refer to the catalog of the ARM11 series.
*
Applicable only to the manifolds with the internal pilot specifications
*
This regulator block cannot be combined with the vacuum release valve of the SJ3A6 series.
L
SUP/EXH block assembly with regulator and pressure switch (for internal pilot manifold)/How to Order
*
When mounting on the manifold, specify it on the manifold specification sheet.
L
SJ3000 Series Valve with Speed Controller/How to Order
A: Lateral
B: Upward
Regulator knob
3/5(E) port
1(P) port
(Arrow marks show the display visual
observation directions.)
F: Fitting side
C: Coil side
D: D side
U: U side
∗
This figure shows the pressure switch
“F: Fitting side.”
Identification color
position
(Speed controller)
∗
Refer to
∗
1.
For 4(A) side
For 2(B) side
4(A) port
2(B) port
0
Meter-out Identification color: Silver
1
Meter-in
Identification color: Black
Straight
(Metric size)
C6: ø6 One-touch fitting
C8: ø8 One-touch fitting
(Inch size)
N7: ø1/4" One-touch fitting
N9: ø5/16" One-touch fitting
Elbow fitting (Upward entry)
(Metric size)
L6: ø6 One-touch fitting
L8: ø8 elbow fitting
Elbow fitting (Downward entry)
(Metric size)
B6: ø6 elbow fitting
B8: ø8 elbow fitting
Nil
Without pressure display function
A
Analog pressure gauge
N
Digital pressure
switch
NPN open
collector
External wiring
Q
Internal wiring
P
PNP open
collector
External wiring
S
Internal wiring
Nil
*
1
Analog pressure gauge: The unit of the product
nameplate and pressure display is MPa.
Z
*
2,
*
3
Analog pressure gauge: The unit of the product
nameplate and pressure display is psi.
ZA
*
2,
*
4
Digital pressure switch: With unit
selection function (Initial setting: MPa)
Nil
Without lead wire with connector
L
With lead wire with connector
Nil
Without pressure display function
F
Fitting side
D
D side
C
Coil side
U
U side
Nil
For connector type
N
For individual wiring
A
Lateral
B
Upward
Symbol
Specifications
Nil
Relieving
2
Non-relieving
83
SJ1000/2000/3000
Series