![background image](http://html1.mh-extra.com/html/smc-networks/sj-1000-series/sj-1000-series_manual_1299383046.webp)
SJ1000/2000/3000
Series
EX180 Integrated Type
(For Output) Serial Transmission System
SI Unit Part Nos.
How to Order
How to Order Manifold Assembly
· For the valve arrangement, the valve closest to the D side is considered the 1st station.
· Under the manifold part number, state the valves to be mounted in order
starting with the 1st station as shown in the figure. If the arrangement becomes
too complicated, specify the details on a manifold specification sheet.
∗
When ordering a manifold, specify the part nos. of the valves to be
mounted on it. (An order cannot be placed with only the manifold part no.)
The asterisk denotes the symbol for the assembly.
Prefix it to the part numbers of the solenoid valve, etc.
Ordering example (
SS5J3-60SV2
m
-
m
)
SS5J3-60SV2D-06D ·········· 1 set (Manifold part no.)
∗
SJ3160-5CU-C6 ················· 2 sets (Single solenoid part no.)
∗
SJ3260-5CU-C6 ················· 2 sets (Double solenoid part no.)
∗
SJ3260-5CZJ-C6 ················ 1 set (Double solenoid, with switch part no.)
∗
SJ3260-5MZ-C6 ················· 1 set (Double solenoid, individual wiring/
lead wire length 300 mm part no.)
For details on the EX180 Integrated Type (For Output) Serial Transmission
System, refer to the
Web Catalog
and the Operation Manual. Please download
the Operation Manual via the SMC website: https://www.smcworld.com
V2
U
SS5J
60S
3
05
D
SJ3260-5CU-C6 (2 sets)
SJ3260-5MZ-C6 (1 set)
Double solenoid, individual wiring/
lead wire length 300 mm (24 VDC)
SJ3260-5CZJ-C6 (1 set)
Double solenoid, with switch (24 VDC)
Double solenoid (24 VDC)
Single solenoid (24 VDC)
SUP/EXH block
(D side mounting)
SJ3160-5CU-C6 (2 sets)
D side
U side
1
3
2
Stations
RoHS
y
Unit mounting
position
D
D side
t
SI unit common
specification
Nil
Positive common
N
Negative common
o
Pilot type
Nil
Internal pilot
S
Internal pilot, Built-in
silencer
R
External pilot
RS
External pilot, Built-in
silencer
∗
There is no need to enter anything
when the SUP/EXH block mounting
position “M” is selected.
∗
The 3/5(E) port is plugged for
the built-in silencer type.
e
Component module
0
Without SI unit
V2
CC-Link (32 points)
Q2
DeviceNet (32 points)
Q3
DeviceNet (16 points)
∗
Please contact SMC for SI unit
specifications.
Item
Specification
Power source
for driving valve
Non-polar
24 VDC +10%/−5%
With power-saving circuit (Continuous duty) 24 VDC +10%/0%
u
Valve stations
Symbol Stations
Note
01
1 station
Up to 32 solenoids
can be selected.
…
…
32
32 stations
∗
This number also includes the blanking block
assembly. Since single and double wiring are
available for the blanking block assembly,
select a model compatible with the valve wiring
specification to be used. (Refer to page 78.)
Symbol Component module/Communication connector Common specification SI unit part no.
V2
CC-Link (32 points)
T-branch type
NPN output (Positive common) EX180-SMJ3
V2N
PNP output (Negative common) EX180-SMJ5
V2A
CC-Link (32 points)
Straight type
NPN output (Positive common) EX180-SMJ3A
V2AN
PNP output (Negative common) EX180-SMJ5A
Q2
DeviceNet (32 points)
T-branch type
NPN output (Positive common) EX180-SDN3
Q2N
PNP output (Negative common) EX180-SDN5
Q2A
DeviceNet (32 points)
Straight type
NPN output (Positive common) EX180-SDN3A
Q2AN
PNP output (Negative common) EX180-SDN5A
Q3
DeviceNet (16 points)
T-branch type
NPN output (Positive common) EX180-SDN4
Q3N
PNP output (Negative common) EX180-SDN6
Q3A
DeviceNet (16 points)
Straight type
NPN output (Positive common) EX180-SDN4A
Q3AN
PNP output (Negative common) EX180-SDN6A
i
SUP/EXH block
mounting position
U
U side
D
D side
B
Both sides
M
∗
1
Special specifications
∗
1 Specify the required specifi-
cations (including port sizes
other than ø8) on the mani-
fold specification sheet.
r
Communication
connector
Nil
T-branch type
A
Straight type
∗
The communication connector
and power connector are
shipped together with the
manifold. The power connector
is only available for the straight
type.
w
u
y
!1
o !0
e
r t
i
q
q
Series
1
SJ1000
2
SJ2000
3
SJ3000
(SJ1000/2000/3000
mixed
∗
1
)
∗
1 Select “3” for the com-
bination of SJ1000 and
SJ2000 valves.
w
Mixed mounting type
Nil
Standard
∗
1
M
Mixed mounting
∗
2
∗
1 For SJ1000, 2000, and 3000
series valves, select “Nil” when
only using a single series.
∗
2 Select “M” when SJ1000,
SJ2000, or SJ3000 series
valves will be mounted on the
same manifold base together.
!0
SUP/EXH block fitting
specification
Nil
Straight fitting
With external
pilot spec.
X, PE port:
Elbow fitting
L
Elbow fitting
(Upward)
With external
pilot spec.
X, PE port:
Straight fitting
B
Elbow fitting
(Downward)
With external
pilot spec.
X, PE port:
Elbow fitting
∗
There is no need to enter anything when
the SUP/EXH block mounting position
“M” is selected.
!1
DIN rail length specified
Nil
Standard length
2
2 stations Specify a length
longer than that of
the standard rail.
…
…
32
32 stations
∗
Specify the number of valve
stations without exceeding the
max. number of stations.
Plug-in
Connector Type
®
∗
1 SJ2000/3000 only
∗
1
An order cannot be placed with only the manifold part
no. Be sure to order solenoid valves for mounting at
the same time while referring to the ordering example.
45
Type
60S
m