![background image](http://html1.mh-extra.com/html/smc-networks/sj-1000-series/sj-1000-series_manual_1299383026.webp)
How to Order
V
Cable type manifold
60
D
L F
1
U
SS5J 3
05
· For the valve arrangement, the valve closest to the D side is
considered the 1st station.
· Under the manifold part number, state the valves to be mounted in
order starting with the 1st station as shown in the figure. If the
arrangement becomes too complicated, specify the details on a
manifold specification sheet.
∗
When ordering a manifold, specify the part nos. of the valves to be
mounted on it. (An order cannot be placed with only the manifold part no.)
The asterisk denotes the symbol for the assembly.
Prefix it to the part numbers of the solenoid valve, etc.
Ordering example (
SS5J3-60LPD2
)
SS5J3-60LPD2-06D ··············1 set (Manifold part no.)
∗
SJ3160-5FZ-C6 ····················2 sets (Single solenoid part no.)
∗
SJ3260-5FZ-C6 ····················4 sets (Double solenoid part no.)
D side
U side
1
3
2
Stations
Double solenoid (24 VDC)
SJ3260-5FZ-C6 (4 sets)
Single solenoid (24 VDC)
SJ3160-5FZ-C6 (2 sets)
SUP/EXH block (D side mounting)
RoHS
®
e
Connector type
F
: D-sub connector
(25 pins)
P
: Flat ribbon cable
(26 pins)
PG
: Flat ribbon cable
(20 pins)
PH
: Flat ribbon cable
(10 pins)
t
Connector entry direction
1
: Upward
2
: Lateral
y
Manifold wiring specification
Nil
All double wiring
∗
1
S
All single wiring
∗
2
∗
1 All double wiring: 2-position single,
double, 3-position, and 4-position valves
can be used on all manifold stations.
∗
2 All single wiring: Available only for the
manifold which has 2-position single for
all stations
Note that 2-position double, 3-, or
4-position valves cannot be used.
∗
If a mixture of single wiring and double
wiring is required, it is available as a
special order.
r
Connector mounting position
Symbol
Mounting position
D
D side
!1
DIN rail length specified
Nil
Standard length
3
3 stations Specify a length
longer than that of
the standard rail.
…
…
20
20 stations
∗
Specify the number of valve stations
without exceeding the max. number
of stations.
i
SUP/EXH block mounting position
U
U side
D
D side
B
Both sides
M
∗
1
Special specifications
∗
1 Specify the required specifications
(including port sizes other than ø8)
on the manifold specification sheet.
o
Pilot type
Nil
Internal pilot
S
Internal pilot, Built-in
silencer
R
External pilot
RS
External pilot, Built-in
silencer
∗
There is no need to enter anything
when the SUP/EXH block mounting
position “M” is selected.
w
y
!0 !1
i o
e r t
u
q
q
Series
2
SJ2000
3
SJ3000
w
Cable type
∗
This number also includes the blanking plate assembly.
∗
The cable type is applicable to 2 or more stations.
F
: D-sub connector (25 pins)
PG
: Flat ribbon cable (20 pins)
PH
: Flat ribbon cable (10 pins)
P
: Flat ribbon cable (26 pins)
Symbol Stations
Note
02
2 stations
All double
wiring
…
…
10
10 stations
02
2 stations
All single
wiring
…
…
20
20 stations
Symbol Stations
Note
02
2 stations
All double
wiring
…
…
04
4 stations
02
2 stations
All single
wiring
…
…
08
8 stations
Symbol Stations
Note
02
2 stations
All double
wiring
…
…
09
9 stations
02
2 stations
All single
wiring
…
…
18
18 stations
Symbol Stations
Note
02
2 stations
All double
wiring
…
…
10
10 stations
02
2 stations
All single
wiring
…
…
20
20 stations
u
Valve stations
!0
SUP/EXH block fitting specification
Nil
L
B
Straight fitting
With external pilot spec.
X, PE port: Elbow fitting
Elbow fitting
(Upward)
With external pilot spec.
X, PE port: Straight fitting
Elbow fitting
(Downward)
With external pilot spec.
X, PE port: Elbow fitting
∗
There is no need to enter anything when the SUP/EXH block mounting position “M” is selected.
How to Order Manifold Assembly
SJ2000/3000
Series
D-sub Connector/Flat Ribbon Cable
Plug-in
Cable Type
An order cannot be placed with only the manifold part
no. Be sure to order solenoid valves for mounting at
the same time while referring to the ordering example.
25