![background image](http://html1.mh-extra.com/html/smc-networks/sj-1000-series/sj-1000-series_manual_1299383100.webp)
How to Order
V
Vacuum release valve manifold with restrictor
An order cannot be placed with only the manifold part
no. Be sure to order solenoid valves for mounting at
the same time while referring to the ordering example.
RoHS
SJ3A6
Series
Vacuum Release Valve with Restrictor
Plug-in
Cable Type
®
60
U
SS3J3
05
V
L
D
How to Order Manifold Assembly
· For the valve arrangement, the valve closest to the D side is
considered the 1st station.
· Under the manifold part number, state the valves to be mounted in
order starting with the 1st station as shown in the figure. If the
arrangement becomes too complicated, specify the details on a
manifold specification sheet.
The asterisk denotes the symbol for the assembly.
Prefix it to the part numbers of the solenoid valve, etc.
Ordering example (
SS3J3-V60LPD2-
m
)
SS3J3-V60LPD2-06D ············1 set (Manifold part no.)
∗
SJ3A6-5FZ-DP ························4 sets (With plug part no.)
∗
SJ3A6-5FZ-P ···························2 sets (With plug part no.)
1
3
2
With plug (24 VDC)
SJ3A6-5FZ-P (2 sets)
With plug (24 VDC)
SJ3A6-5FZ-DP (4 sets)
SUP/EXH block (D side mounting)
D side
U side
Stations
r
Connector mounting
position
Symbol
Mounting position
D
D side
q
Vacuum release valve
with restrictor type
w
Cable type
o
DIN rail length
specified
Nil
Standard length
3
3 stations Specify a length
longer than that of
the standard rail.
…
…
10
10 stations
∗
When specifying a length longer
than that of the standard rail, se-
lect the number of valve stations
without exceeding the max. num-
ber of stations.
e
Connector type
Symbol
Mounting position
Page
Note
F
D-sub connector
25
Parallel wiring
P
Flat ribbon cable 26 pins
PG
Flat ribbon cable 20 pins
PH
Flat ribbon cable 10 pins
u
SUP/EXH block
mounting position
U
U side
D
D side
B
Both sides
M
∗
1
Special specifications
∗
1 For the special specifications, a
port size of the SUP/EXH block
assembly can be specified. At
this time, the mounting position
becomes only U, D, or B.
∗
This number also includes the blanking block assembly.
∗
The cable type is applicable to 2 or more stations.
F
: D-sub connector
PG
: Flat ribbon cable (20 pins)
P
: Flat ribbon cable (26 pins)
PH
: Flat ribbon cable (10 pins)
Symbol Stations
02
2 stations
…
…
04
4 stations
Symbol Stations
02
2 stations
…
…
10
10 stations
Symbol Stations
02
2 stations
…
…
09
9 stations
Symbol Stations
02
2 stations
…
…
10
10 stations
y
Valve stations
t
Connector entry
With parallel wiring specifications,
it is necessary to select the con-
nector entry direction (1: upward,
2: lateral). For details, refer to
page 25.
w
y
e r t
u i o
q
i
SUP/EXH block fitting specification
Nil
L
B
Straight fitting
X, PE port:
Elbow fitting
Elbow fitting
(Upward)
X, PE port:
Straight fitting
Elbow fitting
(Downward)
X, PE port:
Elbow fitting
∗
There is no need to enter anything when the SUP/EXH block mounting position “M” is selected. Also, this manifold comes
standard with external pilot specifications.
99