![background image](http://html1.mh-extra.com/html/smc-networks/rs2h-series/rs2h-series_operation-manual_1299684012.webp)
- 11 -
3-6. How to change piping port position
If the piping port position needs to be changed for reasons of surrounding space, loosen the hexagon
socket head plug, then mount in the new position.
Figure-5
3-7. Shock absorber resistance adjustment method
To stop a transferred object gently, loosen the set screw (M4) on the stopper and turn the shock
absorber dial according to the energy value of the transferred object to select the optimum
absorption position (resistance value). After adjustment, tighten the set screw firmly to secure the
shock absorber dial.
Set screw (M4) tightening torque: 1.5N
・
m
Figure-6
Warning
(1) Do not put your hand or finger between the lever holder and rod cover.
Do not put your hand or finger between the lever holder and the rod cover when lowering the cylinder
during adjustment of the shock absorber.
Caution
(1) When adjusting the shock absorber resistance value, first try the maximum value and
then proceed to smaller values.
Confirm that the adjustment position is appropriate to avoid impact and bounce when the transferred
object hits the shock absorber. When shipped, the shock absorber is adjusted to the maximum
resistance value.
Set screw (M4)
Hexagon socket head plug
Tightening torque
RS2H50
・・・
7~9Nm
RS2H63, 80
・・・
12~14Nm
Summary of Contents for RS2H Series
Page 24: ...23...