SMC Networks PSE3 A Series, Operation Manual, Page: 28 / 72

-27-
No.PS
※※
-OMU0012-A
■
[F 0] Switching function of pressure range, display unit and switch output specifications
Pressure range setting
Pressure range that matches with the connected sensor can be selected.
In addition, the required range can be set and displayed. (Additional range)
•
Relation between analog input and digital display
Set value A B
0.002 0 kPa 2 kPa
-0.1 0 kPa -101 kPa
F0.1 -100 kPa 100 kPa
0.1 0 kPa 100 kPa
0.5 0 kPa 500 kPa
1 0 MPa 1 MPa
2
0 MPa
2 MPa
5
0 MPa
5 MPa
10
0 MPa
10 MPa
20
0 MPa
20 MPa
25
0 MPa
25 MPa
USEr Input value (setting) Input value (setting)
•
Available display unit and minimum set value
Pressure range
Rated
pressure
Display MPa kPa Pa Kgf/cm
2
bar mbar psi inHg mmHg mmH
2
O
Fine differential pressure 2 kPa 0.002 - 0.001 1 - - 0.01 0.001 - - 0.1
Vacuum 101 kPa -0.1 0.001 0.1 - 0.001 0.001 - 0.01 0.1 1 -
Compound ±100 kPa F0.1 0.001 0.1 - 0.001 0.001 - 0.02 0.1 1 -
Low pressure 100 kPa 0.1 0.001 0.1 - 0.001 0.001 - 0.01 - - -
Positive pressure
500 kPa 0.5 0.001 1 - 0.01 0.01 - 0.1 - - -
1 MPa 1 0.001 1 - 0.01 0.01 - 0.1 - - -
High pressure
2 MPa 2 0.001 1 - 0.01 0.01 - 0.2 - - -
5 MPa 5 0.01 - - 0.1 0.1 - 1 - - -
10 MPa 10 0.01 - - 0.1 0.1 - 1 - - -
20 MPa 20 0.01 - - 0.1 0.1 - 2 - - -
25 MPa 25 0.02 - - 0.2 0.2 - 2 - - -
Additional range × 1 USEr
It varies depending on the minimum unit setting of the additional range.
(All pressure units are selectable)