Operation 2: Pressure Setting
Manual setting
PRESSURE
SET
CH
kPa
MPa
OUT2
1
2
3
4
OUT1
PRESSURE
SET
CH
kPa
MPa
OUT2
1
2
3
4
OUT1
PRESSURE
SET
CH
kPa
MPa
OUT2
1
2
3
4
OUT1
PRESSURE
SET
CH
kPa
MPa
OUT2
1
2
3
4
OUT1
PRESSURE
SET
CH
kPa
MPa
OUT2
1
2
3
4
OUT1
PRESSURE
SET
CH
kPa
MPa
OUT2
1
2
3
4
OUT1
SET
SET
SET
(For CH1)
(For CH1)
SET
SET
SET
SET
Channel selection
OUT1 setting (1)
Manual mode
For normally open
Displays
alternately
Manual mode
Manual mode
Manual mode
Manual mode
To measuring mode
CH1
CH2
CH3
CH4
Increases the
set value
Decreases the
set value
For normally closed
OUT1 setting (2)
For normally open
Displays
alternately
Increases the
set value
Decreases the
set value
For normally closed
OUT2 setting (1)
/CH1 only
For normally open
Displays
alternately
Increases the
set value
Decreases the
set value
For normally closed
OUT2 setting (2)
/CH1 only
For normally open
Displays
alternately
Increases the
set value
Decreases the
set value
For normally closed
For CH1
Displays rectified value
For CH2 to CH4
Output mode
Hysteresis mode: Hysteresis of the switch output can be set arbitrarily.
<Normally open>
Switch output 1 & 2
P2 P1
P4 P3
ON
OFF
High pressure: Compound pressure type
Positive pressure type
High vacuum: Vacuum type
Hysteresis
Switch output 1 & 2
n2 n1
n4 n3
ON
OFF
Hysteresis
<Normally closed>
Note) If the hysteresis is set for less than 2 digits, the switch output may
possibly chatter when the input pressure changes around the set
value.
Switch output 1 & 2
P1 P2
P3 P4
ON
OFF
Hysteresis Hysteresis
<Normally closed>
Note) The hysteresis is set to 3 digits. When setting the pressure, allow 7
digits or more.
Note 1) If the hysteresis is set too small, the switch output may possibly
chatter when the input pressure changes around the set value.
Note 2) The hysteresis is set to 3 digits. When setting the pressure in the
window comparator mode, allow 7 digits or more.
If the allowance is less than 7 digits, the controller will not
operate.
Switch output 1 & 2
n1 n2
n3 n4
ON
OFF
Hysteresis Hysteresis
–101.0 to 101.0 kPa
10.0 to –101.0 kPa
–10.0 to 101.0 kPa
–0.1 to 1000.0 MPa
Display
Adsorption and vacuum
release verification
Adsorption verification
Supply pressure
verification
Leak test
P2(n1) > P1(n2)
P2(n1) < P1(n2)
P2(n1) > P1(n2)
P2(n1) > P1(n2)
P2(n2)
≤
P1(n1)
P2(n2)
≥
P1(n1)
P2(n2)
≤
P1(n1)
P2(n2)
≤
P1(n1)
∗
P3(n3) and P4(n4) are the same as P1(n1) and P2(n2).
Measur
ing mode
Window comparator mode: Allows the switch output to be turned
ON or OFF within any set pressure range.
<Normally open>
Displays zero when the
auto shift input function
is not turned on.
F
or CH2 to CH4
High pressure: Compound pressure type
Positive pressure type
High vacuum: Vacuum type
High pressure: Compound pressure type
Positive pressure type
High vacuum: Vacuum type
High pressure: Compound pressure type
Positive pressure type
High vacuum: Vacuum type
Regulating
pressure range
Main
application
Hysteresis
mode
Note 1)
Window
comparator
mode
Note 2)
16-3-13
ZSE
ISE
PSE
Z
I
SE3
PS
Z
I
SE
1
2
ZSP
ISA2
IS
ZSM
PF2
IF
Data
Series
PSE530/200
Multi-channel Controller/Pressure Sensor
SHOP ONLINE at www.airlinehyd.com
800-999-7378
