SMC Networks PFMC7102-L Operation Manual Download Page 73 | Manualshive

Page: 73 / 98

background image

-72-

No.PF

※※

-OMY0002

Maintenance

How to reset the product after a power cut or when the power has been unexpectedly removed

The settings of the product are retained from before the power cut or de-energizing.
The output condition also recovers to that before power cut or de-energizing, but may change depending on
the operating environment. Therefore, check the safety of the whole installation before operating the product.

IO-Link Specifications

■

Outline of IO-Link functions

○Communication function

This product can check the flow/temperature measurement value, diagnostic information and switch output
status using cyclic data communication via the IO-Link system.

○Product status monitoring function

This function monitors the product status via the IO-Link.
•Several errors (e.g. internal hardware errors) can be monitored.
•Several warnings (e.g. temperature sensor error, flow measurement error) can be detected.

○Data storage function

The Data storage function stores the IO-Link device parameter settings to the IO-Link master.
With the IO-Link data storage function, the IO-Link device can be replaced easily without re-setting the
equipment construction or setting parameters
When the device parameter is set and downloaded to the device using the IO-Link setting tool, the
parameter will be uploaded to the data storage in the master by the system command after download
(backup instruction by the communication command).

When the device is replaced with the same type of IO-Link device due to failure, the parameter settings
stored in the master are downloaded automatically, device can be operated with the parameter settings of
the previous device.
Device parameter setting is applicable to 3 types of back-up levels of the master setting ("Inactive",
"back-up/Restore", "Restore").
"Back-up" implies the activation of upload and "restore" implies download.

■

Communication specifications

IO-Link type

Device

IO-Link version

V1.1

Communication speed

COM2 (38.4 kbps)

Min. cycle time

3.4 ms

Process data length

Input Data: 4 byte, Output Data: 0 byte

On request data communication

Available

Data storage function

Available

Event function

Available

«
...
71
72
73
74
75
...
»

Summary of Contents for PFMC7102-L



































































































Reviews:

No comments

Related manuals for PFMC7102-L

Brand: NETGEAR Pages: 15

Brand: H3C Pages: 204

H3C S7500E Series

Brand: H3C Pages: 44

H3C S7500E Series

Brand: H3C Pages: 11

H3C S7500E Series

Brand: H3C Pages: 25

Brand: H3C Pages: 46

Brand: Magnetrol Pages: 12

Brand: Magnimage Pages: 53

TRIPP LITE Series

Brand: Eaton Pages: 8

Brand: NETGEAR Pages: 36

Brand: Ultra Pages: 20

Brand: socomec Pages: 78

Brand: UniFi Pages: 8

S12500G-AF Series

Brand: H3C Pages: 105

Brand: Orno Pages: 2

FL SWITCH SFN 16TX

Brand: Phoenix Contact Pages: 6

Brand: EtherWAN Pages: 239

Brand: H3C Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands