![background image](http://html1.mh-extra.com/html/smc-networks/pfm5-series/pfm5-series_operation-manual_1298865007.webp)
-6-
No.PF##-OMJ0016
●
Product handling
∗
Installation
•
Tighten to the specified tightening torque.
If the tightening torque is exceeded the mounting screws and brackets may be broken.
If the tightening torque is insufficient, the product can be displaced and loosen the mounting screws.
(Refer to "Mounting and Installation" on page 14 to 16.)
•
Do not apply excessive stress to the product when it is mounted with a panel mount.
Otherwise damage to the product and disconnection from the panel mount can result.
•
Be sure to ground terminal FG when using a commercially available switch-mode power supply.
•
Do not drop, hit or apply excessive shock (over 980m/s
2
) to the product.
Otherwise damage to the internal parts can result, causing malfunction.
•
Do not pull the lead wire forcefully, not lift the product by pulling the lead wire.(Tensile force 49 N or less)
Hold the body when handling to avoid the damage of the product which lead to cause the failure and malfunction.
•
For piping of the product, hold the piping with a spanner on the metal part of the piping (Piping
attachment).
Holding other part with spanner leads to damage the product.
•
Eliminate any dust left in the piping by air blow before connecting the piping to the product.
Otherwise it can cause damage or malfunction.
•
Refer to the flow direction of the fluid indicated on the model number plate for installation and piping.
Remaining air can cause inability to measure accurately.
•
Do not mount the body with the bottom facing upwards.
•
Do not insert metal wires or other foreign matter into the flow path.
It can damage the sensor causing failure or malfunction.
•
Never mount a product in a location that will be used as a foothold.
The product may be damaged if excessive force is applied by stepping or climbing onto it.
•
If the entering of foreign material to the fluid is possible, install and pipe the filter or the mist separator to
the inlet to avoid failure and malfunction.
See the figure below for recommended pneumatic circuit.
Summary of Contents for PFM5 Series
